deep water well drilling rigs
C600CLCA truck mounted drilling rig is designed by our professional engineers with the world leading technology concept; It is a kind of truck mounted and rotary drilling rig.
The truck chassis adopts the special crane chassis of brand CHAN'AN TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower, feed mechanism are set up on the chassis.
This rig is a rotary drilling rig with directional circulation. It is equipped with WB850/4-80 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulic system.
We can install the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
We set up a generator (MF) which is convenient to illuminate or work at night.
There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverse circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with WB850/4-80 mud pump; can carry out core-drilling with other special drilling tool
|Speed of turntable(r/min)||117;102;60;38;22;13;16(reverse)|
|Torque of turntable(KN.m)||5.4----50|
|Single rope lifting capacity of main windlass(KN)||50|
|Maximum lifting capacity of main windlass(KN)||300|
|Single rope lifting capacity of assistant windlass(KN)||60|
|Maximum lifting capacity of assistant windlass(KN)||240|
|The lifting capacity of hook(KN)||300|
|Bearing capacity of drilling tower (KN)||300|
|The height of drilling tower (mm)||15000|
|Drill pipe||Kelly bar(mm)||108×108×10500|
|Assistant pipe (mm)||89×10×9000|
|WB850/4-80||Diameter of cylinder (mm)||106|
|plunger pump||Stroke of piston (mm)||155|
| ||Theoretical flow (L / min)||500 600 700 850|
| ||Rated pressure (Mpa)|| 7 6 5 4|
| ||Diameter of suction tube (mm)||106|
| ||Diameter of drain pipe (mm)||64|
| ||Input power (kw)||80|
|Truck chassis||Drive form||8×6|
|Engine||Model||YC6A260-33YC water -cooled four strok diesel engine|
|Rated power (kw)||15 / 30|
|The highest speed(Km/h)||75|
Delivery Time: Based on order quantity, normally it takes 30 days for production.Only 2 or 3 days if we have stock on your request size.
Quality Control: We have our professional QC and all the products will be strict inspection and testing for every order before shipping out.
After Services: Technical Support will be available in any time. We could provide the professional suggestion for you.
EX: 1.Select the right most suitable products.
2. According to the rock types, choosing the face type, button tooth type.
3. According to the different purpose,. choosing the different body type
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.