A165 DTH Drilling Rig
General Description and Application:
Our rig A165 is a firm, integrated, self propelled, crawler mounted, diesel engine driven(electric driven is optional), hydraulically operated blast hole drilling rig for drilling holes from115 mmto180 mmdiameter by DTH method in soft to hard formations.
The rig is a full hydraulic and high-efficiency drilling machine, which is widely used for slope presplit and blast hole projects in surface mine, stone pit, etc. The compressor, power unit, hydraulic system, cooler, dust collection system etc. are mounted on the excavator type chassis.
Main Feature:
1. A165's main frame is made of rolled structural steel, which is very firm and durable.
2. A165 adopts top drive type hydraulic rotary head. Two Eaton Brand low speed & high torque cycloid motors drive the gear reducer to adjust bypass flow control valve on the console according to the working condition.
3. A drilling rod changer (carousel) is mounted on the tower, which can contain 5 pieces of drilling rods. It can provide easy and automatically (rod) changing. This rod changer is designed for manual or remote swing in and swing out operations.
4. A165 adopts the CUMMINS M11-C330 engine with advanced exhaust gas turbocharger and intake intercooler.
5. The A165 is integrated with Sullair 600XH or 750 XH screw air compressor
Technical Parameters of A-165(Diesel)/A-165E(Electric) DTH drilling rig |
|
Drilling Diameter |
115 mm -180 mm |
|
|
|
|
Drilling Depth |
27 m |
|
| |
PROPULSION SYSTEM |
|
|
Propulsion capacity |
|
|
Mechanism type |
Cylinder and Feed Chain |
|
Diameter of cylinder |
100mm |
|
Rod diameter of cylinder |
70mm |
|
Stroke |
2750mm |
|
Slow propulsion speed |
1.8 mpm |
|
Fast propulsion speed |
27 mpm |
|
Lifting capacity |
6818 kgf. |
|
|
|
|
ROTATION SYSTEM |
ETON (USA ) |
|
Type |
Hydraulic top head drive |
|
Speed range |
0-100 rpm |
|
Max torque |
3.28 KN.m |
|
No. of rotary motors |
2 |
|
Rotary head power |
50 HP/37.3kW |
|
|
|
|
TRAVELLING SYSTEM |
Hydraulic motor driving |
|
Rated power |
50hp |
|
Manufacturer(Motor) |
TIC (Korea) or Teijin (Japan) |
|
Length of Centre of gyration of Crawler |
2875 mm |
|
Crawler centre distance |
1830mm |
|
Crawler ground pressure |
0.89 kg/cm2 |
|
Max. travelling speed |
1.4km/h |
|
Gradeability |
26° |
|
Ground Clearance |
300 mm |
|
|
|
|
TOWER DESIGN |
|
|
Construction |
Fabricated steel structure |
|
Stroke of rotary head |
5500 mm |
|
No. of cylinder be raised |
2 |
|
Diameter of cylinder |
140 mm |
|
Rod diameter of cylinder |
90 mm |
|
Stroke of cylinder |
850 mm |
|
|
|
|
DRILL PIPE (ROD)/CHANGER(CAROUSEL) |
|
Capacity |
5 pcs (rod) in changer and 1 pc in drill string, totally 6 pcs drill rod |
|
Type |
Single arm swing manual type and Remote Hydraulic Cylinder in cabin. |
|
Drill pipe |
114mm OD x4mlong start drill rod. |
|
114mm OD x4.2mlong drill pipe. |
|
Breakout system |
Hydraulic, cylinder operated |
|
| |
COMPRESSOR |
|
|
Manufacturer |
Sullair (USA) |
|
Model |
600XH |
|
Type |
Single stage rotary screw compressor |
|
Displacement |
600 CFM |
|
Pressure |
200 psi |
|
|
|
|
ENGINE |
|
Manufacturer |
Cummins (USA) |
|
Model |
M11-C330 |
|
Power |
330BHP/246KW |
|
Working speed, full load/no load |
2100/1400 rpm |
|
|
|
|
LEVELLING JACKS |
|
|
|
|
|
Number of jacks |
4 |
|
Diameter of cylinder |
125 mm |
|
Stroke |
850 mm |
|
Diameter of jack pads |
600 mm |
|
|
|
|
MAIN FRAME |
|
|
Construction |
Fabricated steel structure |
|
|
|
|
CAB |
YES |
|
Windscreen wiper |
YES |
|
Rearview mirror |
YES |
|
Connection with the chassis |
Bolt connection, Rubber Pad damper and seal |
|
|
|
|
Air Conditioner |
YES |
|
Cool Air |
YES, 4.0KW |
|
Warm Air |
YES, 5.0KW |
|
System Voltage |
24 V D.C |
|
System Electric Power |
Max.380W |
|
|
|
|
HYDRAULIC SYSTEM |
Parker (USA) |
|
Pump |
4 unit gear pump |
|
Drive |
From dampner end thru' propellor shaft |
|
Reservoir capacity |
230 litres |
|
Hydraulic. Oil cooler |
Standard |
|
|
|
|
DIMENSIONS |
|
|
Working condition: |
6500X3400X8000(mm) |
|
Transportation condition |
7900X3400X3660(mm) |
|
Total Weight (DRY) |
18000 Kg. |
|
A165 crawler pneumatic drill rig (down-hole drill rig with high blast pressure) totally utilizes compressed air as its power. It is equipped with pneumatic motor with high power, the heavy-duty hydraulic drill arm and the key parts are all imported, which guarantee the reliable quality of the drill, especially realize much less energy consumption of rolling fraction than that of sliding fraction and make the wear of sliding framework be lower.
A165 crawler pneumatic drill rig is mainly used in stonework drilling, such as water and electricity project, exploitation of open mine and road construction
1. Energy saving
2. High efficiency
3. Low noise
4. Low cost
5. Matching air compressor 10m3/min 13bar
6.Low speed,high torque
7.Advanced Cylinder and Stable move
8.Two-level filter equipment to make sure inlet air's safety and lengthen diesel engine's life
9.Monitor rig hydraulic system pressure and boost pressure at any time
10.Using well-known brands of multi-way control valve, easy to operate
11.Reliable damping devices to ensure the reliability of the track up rig
12.Setting up light for night operation
13.Set up Rod libraries to facilitate the operation
geothermy drilling machine
1,use with air compressor
2, for photovoltaic solar spiral pile
3,depth 60m
A165 high air pressure DTH drill crawler open with a low engergy consumption, high
efficiency, easy to transport and field construction superior technical performance, vehicle movement organizations from the hydraulic system to achieve, and only washed the source of the wind machine consumption, resulting in air machine matching saves in a complete set of equipment procurement costs. Rotary organizations to adopt a new dualmotor turret to make it to the openair blast drilling operations when drilling large holes to mantain a strong rotary output, dragging air compressor, it has the mobile and flexible and climbing ability,
suitable for rugged venue operations, perforation shift convenience features. Whole diameter 115165mm, with a piercing,high efficiency, maintenace is simple, high reliability, is a mining, highway,
water conservanc water conservancy, power station construction and other construction ideal for drilling
rig operations.
Production ability
We have more than 50 sets of processing equipment to ensure the quality of our product, which has proved worthy by our client's recognition.
And these equipments ensure large production capacity and adequate stock.We have all the small models in stock all year long and the bigger ones ready within 15-30 days.
Customers visit our factory
With all the effort put in, we have successfully marketed our products to almost every corner of the world. Here are the pictures of our clients' visits and our clients' on-the-site operation.
Quality guarantee
Our products has been authorized and certified by TUV and ISO9001: 2008. We guarantee the quality of the machines for one year after the trial run (excluding the wearing parts), but not exceeding 15 months from the date on which machines leave the factory.
Related Product
Our Company & Service
Glorytek Industry (Beijing)Co.,Ltd., located inBeijing,China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.
Factory Picture
FAQ
Q: How can we choose a suitable water well drill rig?
A: We normally recommend a suitable model according to drilling depth, drilling hole dia. and layer condition on site.
Q: Are you a factory or a trading company ?
A: We are an integrated corporation specialized in manufacturing and exporting.
Q: What is your payment terms?
A: We can accept T/T,L/C.
Q:.What is your MOQ? How long is the delivery time?
A: Our MOQ is 1 sets. Normally for drill rig, the delivery time is about 25-30 days after receiving payment, the drilling tools would be about 3-5 days.
Q:. How long is the warranty?
A: The guarantee period for mainframe is one year (excluding the quick wear parts).
Q: Can we print my Logo on the products?
A: Yes, we can. We support OEM .
Contact
Sunny Dong(Sales Representative)
Glorytek Industry (Beijing) Co., Ltd.
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District, Beijing, China.
Website:
glorytek.en.made-in-china.com / glorytek.en.made-in-china.com
Audited Supplier 
){kind=link}