Hot Selling Drilling Equipment Downhole Motor with High Quality

• Customization: Available
• Logo Printing: with Logo Printing
• Size: Middle
• Model NO.: Various Sizes
• Type: Mud Motor
• Material: Stainless Steel
• Certification: CE
• Recommended Hole Size: 83-121mm
• Input Flow Rate: 1.5-3.5L/S
• Pressure Loss: 3.2MPa
• Bit Speed: 185-430r/Min
• Working Torque: 200n.M
• Delay Dynamic Torque: 350n.M
• Output Power: 4.3-10.1kw
• Drilling Weight: 5kn
• Max Drilling Weight: 10kn
• Joint Thread: 11/2reg
• Transport Package: Standard Export Packing
• Specification: SGS
• Trademark: GLORYTEK
• Origin: China
• Production Capacity: 50 Sets Per Month

Product Description

Downhole Motor for Directional Drilling

>>Product Description

Technical Parameter

Spec.	Recommended Hole Size		Input Flow Rate	Pressure Loss	Bit Speed	Working Torque	Delay Dynamic Torque	Output Power	Drilling Weight	Max Drilling Weight	Joint Thread		Length
Unit	mm	In	L/S	Mpa	r/min	N.m	N.m	KW	KN	KN	In	In	mm
5LZ57×7.0	83-121	31/4-43/4	1.5-3.5	3.2	185-430	200	350	4.3-10.1	5	10	11/2REG	11/2REG	2822
5LZ73×7.0	83-121	31/4-43/4	2-4	3.2	80-160	615	1077	5.8-11.5	12	25	23/8REG	23/8REG	3423
9LZ89×7.0	105-143	41/8-55/8	3-8	3.2	147-392	504	882	8.64-23	20	30	27/8REG	27/8REG	2911
5LZ95×7.0	114-150	41/8-57/8	5-12	3.2	140-320	710	1240	10.5-25	21	40	27/8REG	27/8REG	3920
5LZ120×7.0	152-200	6-77/8	8-16	3.2	80-180	1850	3200	23-47	64	106	31/2REG	31/2REG	5039
5LZ165×7.0V	245-244	81/8-95/8	18-30	3.2	111-167	4440	7770	57.6-86.4	80	160	41/2REG	41/2REG	7408
5LZ165.5×7.0V	215-244	81/8-95/8	18-30	4.0	120-180	5135	8987	72-108	90	180	41/2REG	41/2REG	7748
5LZ172×7.0V	215-244	81/8-95/8	18-30	4.0	120-180	5135	8987	72-108	90	180	41/2REG	41/2REG	7391
5LZ172.5×7.0V	215-244	81/8-95/8	20-35	4.0	115-180	6452	11299	86.4-151.2	100	200	41/2REG	41/2REG	8031
7LZ172.5×7.0V	215-244	81/8-95/8	20-35	4.0	75-180	6527	11420	59.5-108.6	80	160	41/2REG	41/2REG	8631
5LZ185×7.0	215-244	81/8-95/8	20-35	4.0	184	5436	8154	80-140	120	240	41/2REG	61/2REG	8120
5LZ185.5×7.0	215-244	81/8-95/8	20-35	4.0	173	5939	8908	80-140	120	240	41/2REG	61/2REG	8120
5LZ197×7.0	244-311	91/8-125/8	20-40	3.2	61-122	14118	14118	57.6-115.2	120	240	51/2REG	65/8REG	7998
5LZ197.5×7.0	244-311	95/8-121/4	20-40	4.0	85-160	12640	12640	72-144	130	260	51/2REG	65/8REG	8598
7LZ203×7.0	244-311	95/8-121/4	20-40	3.2	70-155	12289	12289	57.6-126.7	150	240	51/2REG	65/8REG	7798
5LZ203.5×7.0	244-311	95/8-121/4	20-40	4.0	70-155	8778	15362	72-158.4	170	260	51/2REG	65/8REG	8598
5LZ216×7.0	273-323	103/4-123/4	22-48	3.2	61-138	8895	15567	63.36-138.29	190	300	65/8REG	65/8REG	7756
5LZ216.5×7.0	273-323	103/4-123/4	22-48	4.0	61-138	11117	19455	79.2-172.8	238	378	65/8REG	65/8REG	8546
5LZ244×7.0	311-445	121/2-171/2	50-75	3.2	91-136	15124	26468	144-216	200	360	65/8REG	75/8REG	8635
7LZ244.5×7.0	311-445	121/2-171/2	50-75	4.0	91-136	18905	33085	180-270	250	450	65/8REG	75/8REG	9235

 

Downhole motor

Down-hole motor is a positive-displacement motor. It converts high fluid power into mechanical energy of bit rotation. Down-hole motor is widely used for drilling, deflecting, azimuth control, coring, reaming, side tracking drilling and workover for horizontal well, cluster wells and straight well of oilfields and coal mines. In addition, it is suitable for complex drilling


Glorytek provides various sizes of down-hole motors for hole sizes from 1 7/8" to 26". Popular sizes are 1 11/16", 2 7/8", 3 1/8", 3 1/2", 3 3/4", 4", 4 3/4", 5", 5 5/16",5 7/8", 6 1/4", 6 1/2", 6 3/4", 7 1/4", 7 3/4", 8",8 1/4", 8 1/2", 9", 9 5/8" and 11 1/4".
Glorytek is able to provide down-hole motors of special size, high-speed, medium-speed and low-speed, according to customer's requirements





Downhole Motor Working Principle


Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump, to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.


 Constitution of Downhole Motor 

Downhole motor is composed of five assemblies of bearing, power section, coupling, anti-drop and bypass valve.

 Features

 

Features of High Flow Rate Down-hole Motor	Features of Uniform Wall Thickness Down- hole Motor
The adoption of hollow rotor cooperating with hard alloy jet nozzle of different sizes increases input flow rate and proppant carrying capacity.	This down-hole motor can effectively solve the problem of uneven thickness of motor's rubber. Its characteristics are as follows: high pressure enduring for single grade, large output power, wide range of high efficiency, etc.
Features of Bent Angle Adjustable Down-hole Motor	Features of Near Bit Down-hole Motor
The bend angle of down-hole motor can be adjusted on wellhead. Stabilizers of different shapes and sizes can be changed according to different requirements.	Measure point of measuring instrument is installed in downhole motor, which is nearer to drilling bit. Drill track is more accurate and reliable.
Features of Standard Down-hole Motor	Features of Saturated Saltwater Mud Resistant Down-hole Motor
Standard power section; the transmission shaft is lubricated by drilling fluid; available in vertical, single-bend and double-bend types; maximum working temperature is 120°C.	The special coating layer of rotor has stronger ability of corrosion and wear resistance, enabling down-hole motors to work a long time in saturated saltwater mud.
Features of Oil-sealed Transmission Shaft Down-hole Motor	Features of High Temperature Resistant Down-hole Motor
The working environment of thrust bearing and radial bearing is improved, and the working time of down-hole motor during one single trip is increased.	The stator is equipped with superior quality high temperature resistant rubber, which enables down-hole motor to perform stably for a long time under the hole where temperature even reaches 150°C and180°C.
Features of Extended Down-hole Motor	Features of High Deflection Down-hole Motor
The torque is increased by 30% to 60% compared with standard down-hole motors; the transmission shaft is lubricated by drilling fluid; available in vertical, single- bend and double-bend types; maximum working temperature: 120°C.	The unique structure makes the motor shorter, the bending point closer to drill bit, and higher build-up rate.

 Related Products



>> Packing and Transport

Packing: Standard packing.
Delivery: Normally 20 days after your payment.



>> Company Profile

Glorytek Industry (Beijing)Co.,Ltd.,

located in Beijing, China, is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for decades. We are supported and assisted by a highly experienced team of designers and engineers that enable us to complete all the assigned projects successfully as per the specified requirement from our clients.

Our products are widely used in the scope of mining, water well drilling and exploration, anchor grouting project, side slope protection engineering, oil and gas engineering,underwater rock drilling & blasting operations of seaport channel, hydropower project, national defense projects ect.



>> Certifications



>> Latest Exhibition



>> Customer Photos



>> After-sale Warranty

(1) Free change once the problem caused by the quality issue.
(2) Timely after-sale assistance shall be provided all the time.

>> FAQ

Q: Are you original manufacturer or trading company?
A: We are an integrated corporation specialized in manufacturing and exporting.

Q: Can you supply related drilling tools?
A: Yes, we can supply full set of drilling tools, such as drill pipe, tricone bit, PDC bit, drag bit, DTH Hammer. Moreover, we
have drilling equipments like rigs, mud pump, air compressor, etc. as well.

Q: Which payment terms can you accept?
A: Normally we prefer 30% advance payment after purchase order by T/T, 70% remaining payment before shipping by T/T. And 100% advance payment after purchase order by T/T for small orders.

Q: How is your delivery time?
A: This will depend on your purchasing quantity. Normally it will be around 20 days after we receive your payment.

Q: How can you ensure the quality?
A: We have our professional QC team and all the products will be strict inspection and testing for every order before shipping out.

>> Contact Us

Jane Cheng 
Sales Representative 

Glorytek Industry ( Beijing ) Co., Ltd. 
Address:No.B-2507, DongWeiCheng, GuanZhuang,Chao Yang District, Beijing, China. 
Tel: [phone] 
Fax: [phone] 
Mobile:[phone] 
Website:  glorytek.en.made-in-china.com