| Customization: | Available |
|---|---|
| Certification: | CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1000-B Technical Parameter And Configuration
1,Technical Parameter
Model: 1000-B
Max. drill depth:1000m
Drill diameter:140-800mm
Engine:Cummins 180KW
Working air pressure:1.05-6.45MPa
Air consumption:16-96.4 m³/min
Drill rod length:4.5m
Drill rod diameter:Φ89/Φ108/Φ114mm/Φ127mm
Air reverse double ply drill rod :Φ127mm(Optional)
Axial pressure: 10t
Lifting force: 40t
Slow lifting speed:4.4m/min
Slow feed speed:0.5-7.2m/min
Fast lifting speed:25m/min
Fast feed speed:36m/min
Rotation torque:24000Nm;12000Nm
Rotation speed:0-80r/min;0-160r/min
Lifting ability of big winch:4t; Length of steel rope:60m
Lifting ability of small winch:1.5t; Length of steel rope:60m
Mud pump flow rate:600L/min(Optional)
Centrifugal pump flow rate:1300L/min(Optional)
Dynamo:24Kw/380v(Optional)
Penetration rate:10-25m/h
Grade ability:21°
Weight:17
Whole dimension:8.7×2.3×3.3 m
Application formation:Unconsolidated layer or bedding rock
Drill method: Down the hole
Hammer: Intermediate of high air pressure series
2,Structures features
1. Diesel engine-driving hydraulic system. Travel, rotate, feed, hoist, land, lift, unload and so on are all run by hydraulic components.
2. During rock drilling operation, you can use down the hole hammer or reverse hammer(optional) that air compressor will provide wind to drive and slag. In operation, you can use hammer and common drill rod to make positive circulation operation; or use reverse hammer and double ply drill rod(intake air through the gap of the double ply, and slag through the inner tube) to make reverse circulation operation.
3. If use cutting or tri-cone bit to drill the hole, you can choose mud pump and slag with mud.
4. Working unit consists of feed system, slide guide(mast), top-driving rotary head, slide plate, centering apparatus, unloading system and hoisting system, etc.
5. Hydraulic pressure integrates the top-driving rotary machine into block to realize the power output of the torque and speed of both ends in constant power, low speed high torque and high speed low torque. In order to adapt to different site conditions and drilling iameters.
6. Rotary machine is capable of turning away from the drilling axis, and make it convenient for the winch to drop the pipe and operate.
7. Cylinder plate chain propulsion mode, reliable and durable
8. Roller slide is wearable.
9. Axial pressure, feed speed and rotation speed are adjustable.
10. The lifting ability of big winch is 4 tons. The steel rope is 60 meters long, and it can assist with lifting, dropping the pipe. The lifting ability of small winch is 1.5 tons, and can lift drill bits, tools, etc. Or assist with discharging drill rod.
11. Crawler self-driven structure travel mode, easy to move. Use crawler chassis. Steel track link(Inlaying rubber block is in option which is easy to travel on city streets).With four high landing legs as standard configuration. During long-distance transportation loaded with vehicle, it can be moved onto the vehicle directly and easy for transportation, no need to lift.
12.Separate hydraulic oil cooler allows the drill rig to work continuously and the temperature of hydraulic oil won't get high.
13. During operation, four hydraulic landing legs will adjust the rig body level and stability.
14. During operation, the mast can be fixed with the rig body, and a back knighthead will improve the operation stability of the mast.
15. Level instrument and dedicated centering apparatus ensure the perpendicularity and accuracy of the drilling hole.
16. Compressed-air system provides special oil mist lubricator to lubricate the hammer and longer the serving life of it.
Main Application
Drilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells 
Working Pictures
1. Air Drilling
2. Mud Pump Drilling
3. Core Drilling
Welcome to your inquiries, we will provide our best service, good quality products and competitive price all the time.
| Drilling Parameter | |
| Hole diameter : | 90--1200(mm) |
| Hole depth : | 250(m) |
| Run Of Rod : | 3,4(m) |
| Drill rod diameter : | φ60 φ73 φ89 φ95 φ133(mm) |
| Drilling Technology : | Normaland Reverse Circulation for both Mud and Air |
| Down-The-Hole hammers: | Middle-High-Pressure Air |
| Performance Parameter | |
| Drill Head Inside Diameter : | Φ35 φ60 φ80 φ120 |
| Drill Head lifting speed(m/s) : | 0.37 0.16 |
| Drill Head lifting Force(kN) : | 45.4 105 |
| Drill Head Spin Speed: | A(Forward:14-23-52-84,Reverse:8-13-29-47r/min) |
| B(Forward:32-52-116-188,Reverse:18-29-65-106r/min) | |
| Shape Parameters | |
| Dimensions : | (L-W-H) Working conditions 5300×2000×7200(mm) |
| Transport status: | (L-W-H)7900×2000×3000(mm) |
| Supporting Form : | Mechanical Screw |
| Mast Up-Down : | Hydraulic Unit |
| Rig mass : | 3800(Kg) |
| Chassis : | Trailer with four wheels |
| Power Unit : | Diesel Engine |
| Power : | 49(kW) |
| Pump : | LBN-20 Normal and Reverse Circulation Pump Group |
| Flow(m³/h) : | 80 |
| Main Hoist Lifting Force : | 20.6(kN) |
| Feed Thrust : | 0-15(kN) |
| Notes: Drill head spin speed can be selected, A is normal | |
){kind=link}