High Pressure DTH Hammers
Products Features:
Properties: High pressure DTH hammers as GL series which drilling speed is the best speed, they need the least airflow in work. Their quality is the best stability. And also are widely used in ground project for diving all kinds of MID-hardness, high-hardness and somehow worse drillability rocks.
Characteristics are as follows:
1, this kind of hammer is designed as a strong-wind system, which can have all the high-pressure gas flush off with an aim that keep the hole's bottom clean. The durable piston on the hardness treatment can have two end changed, which can extend the working life.
2, designed a changeable vapour look, which can change the gas charge according to rocks'hardness and abrasion resistance to realize the best flash effect and highest drilling efficiency.
3, simple structure and few but wearable spare parts make longer working time.
4, front joint adding with a multiply heads thread makes the disassembly much easier.
What We Supply:
1) DTH hammers series
A) High pressure series
B) Medium pressure series
C) Low pressure series
D) High efficiency high pressure series
E) Reverse circulation series
2)Outside diameters: 61.2~275mm
3)Drilling diameter: 68~508mm
Application
They are widely used for mine, quarry, road construction for the drilling and blasting work, water well drilling, slope protection, anchoring, etc.
|
Item |
GL335 |
|
Drilling Dia. (Φ /mm) |
90-93 |
|
Hammer length(mm) |
908 |
|
External diameter(mm) |
81 |
|
Weigth(kg) |
21.8 |
|
Working pressure(Mpa) |
0.8~2.1 |
|
Air consumption(m3/Min) |
4.3-14.2 |
|
Torque(N@ M) |
205 |
|
Impact frequency(Times/Min) |
950-1500 |
|
Connection Thread |
API 2 3/8 |
|
Connection Thread |
53-8mm |
){kind=link}