| Customization: | Available |
|---|---|
| Certification: | CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
C600HW Truck Mounted Water Well Drilling Rig
1. C600HW truck mounted drilling rig is a rotary table drilling rig.
2. The truck chassis adopts the special crane chassis of brand HOWO 6*4 TRUCK and the main drive system, the transfer case, gearbox, double-hydraulic winch unit, mud pump, rotary table, drilling tower, are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. There is a independent diesel power: Cummins 132Kw;
5. The main drive of rig is mechanical and the four hydraulic leveling legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated. 6. The rig can carry out down-the-hole hammer drilling if add Compressor(There is no enough room for compressor on the chassis).
7. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the rotary table and is mainly used for water well in industry and agriculture, national defense building foundation, and geothermic well and other foundation working, it is popular at home and abroad.
Main features:
| Technical parameter | |||
| Drilling depth(M) | 600 | ||
| The open hole(mm) | 500 | ||
| The end of hole(mm) | 200 | ||
| Speed of rotary table(r/min) | 12;20;35;48;82;115;10(reverse) | ||
| Torque of rotary table(KN.m) | 5.4---50 | ||
| Single rope lifting capacity of main winch(T) | 5 | ||
| Maximum lifting capacity of main winch(T) | 30 | ||
| Single rope lifting capacity of vice winch(T) | 5 | ||
| Max lifting capacity of vice winch(T) | 20 | ||
| Inner diameter for swivel(Inch) | 2.5 | ||
| the max bearing pressure for swivel(Mpa) | 10 | ||
| The max bearing capacity for swivel (T) | 30 | ||
| The lifting capacity of hook(T) | 30 | ||
| Bearing capacity of mast (T) | 36 | ||
| The height of drilling tower (mm) | 12500 | ||
| The independent power | Cummnis: 132Kw | ||
| Drill pipe | Kelly bar(mm) | 108×108×7500 | |
| Assistant pipe (mm) | Ф89×10×5500 | ||
| Liner Diameter (mm) | 100 110 120 130 140 | ||
| WB3NB-130 Mud pump | Stroke of piston (mm) | 160 | |
| Theoretical flow (L / S) | 8.4 10.3 12.2 14.3 16.6 | ||
| Rated pressure (Mpa) | 10 8 7 6 5 | ||
| Diameter of suction tube | 152mm | ||
| Diameter of discharge pipe | 65mm | ||
| Input power kW(HP) | 95 (130) | ||
| Drive form | 6×4 | ||
| Truck chassis | Engine | Model | ZZ2257M5657 |
| Rated power(HP) | 266 | ||
| The highest speed(Km/h) | 75 | ||
| Weight (kg) | 29500 | ||
| Transport size(L*W*H)(mm) | 13350×2500×4215 | ||
The specifications are subject to change without prior notice due to continued research and development.
Main Application
Drilling wells for urban and rural life
Drilling wells for agricultural irrigation and industries
Drilling for geotechnical survey
Drilling construction engineering holes
Drilling geothermal pump wells 
Working Pictures
1. Air Drilling
2. Mud Pump Drilling
3. Core Drilling
Welcome to your inquiries, we will provide our best service, good quality products and competitive price all the time.
| Drilling Parameter | |
| Hole diameter : | 90--1200(mm) |
| Hole depth : | 250(m) |
| Run Of Rod : | 3,4(m) |
| Drill rod diameter : | φ60 φ73 φ89 φ95 φ133(mm) |
| Drilling Technology : | Normaland Reverse Circulation for both Mud and Air |
| Down-The-Hole hammers: | Middle-High-Pressure Air |
| Performance Parameter | |
| Drill Head Inside Diameter : | Φ35 φ60 φ80 φ120 |
| Drill Head lifting speed(m/s) : | 0.37 0.16 |
| Drill Head lifting Force(kN) : | 45.4 105 |
| Drill Head Spin Speed: | A(Forward:14-23-52-84,Reverse:8-13-29-47r/min) |
| B(Forward:32-52-116-188,Reverse:18-29-65-106r/min) | |
| Shape Parameters | |
| Dimensions : | (L-W-H) Working conditions 5300×2000×7200(mm) |
| Transport status: | (L-W-H)7900×2000×3000(mm) |
| Supporting Form : | Mechanical Screw |
| Mast Up-Down : | Hydraulic Unit |
| Rig mass : | 3800(Kg) |
| Chassis : | Trailer with four wheels |
| Power Unit : | Diesel Engine |
| Power : | 49(kW) |
| Pump : | LBN-20 Normal and Reverse Circulation Pump Group |
| Flow(m³/h) : | 80 |
| Main Hoist Lifting Force : | 20.6(kN) |
| Feed Thrust : | 0-15(kN) |
| Notes: Drill head spin speed can be selected, A is normal | |
){kind=link}