| Customization: | Available |
|---|---|
| Certification: | CE, RoHS, ISO 9001:2000, ISO 9001:2008 |
| Condition: | New |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Main features:
Main features:
1. C600HW truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary drilling rig.
2. The truck chassis adopts the special rig chassis of brand SINO-TRUK 8X4 and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, rotary table, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. This rig has very compact structure, the engine of chassis is adopted SINOTUCK diesel engine 336HP (strong power)/2200rpm
5. The drilling rig has independent diesel engine 6BTA-C180 , 132kw. Not only meet the drilling requirements, but also reduce energy consumption, it is very affordable.
6. We set up a 30kw generator (MF) which is convenient to illuminate or work at night.
7. There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
8. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
9. According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS, Sweden Atlas; can carry out air lifting reverse circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with mud pump; can carry out core-drilling with other special drilling tools.
10. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.
|
Open hole diameter
|
500mm
|
|
Drill depth
|
600m
|
|
Kelly:
|
108×108×7500 ( or 10500)mm
|
|
Drill pipe
|
Φ89×5500(6000or 9000)mm
|
|
Mast height
|
12500mm (or 16232mm)
|
|
Mast efficient height
|
11800 (or 15255mm)
|
|
Max-loading of mast
|
36t
|
|
Main hook rated load
|
32t
|
|
Vice hook rated load
|
25t
|
|
Main winch single rope lifting capacity 50kN; rope capacity 120m
|
|
|
Vice winch single rope lifting capacity 50kN;rope capacity 120m
|
|
|
steel wire specification
|
Φ18NAT6×37+NF1770
|
|
Rotarytable inner diameter
|
500mm;
|
|
Diesel engine:
|
DONGFENG 6BTA5.9-C180-In-line six cylinder water
cooled water cooled four stroke turbocharged intercooled diesel engine,Related power 132kW/2200rpm, MAX torque 750N.m/1600rpm; |
|
When drilling the output rotate speed 1300r/min
|
|
|
Rotarytable speed
|
|
|
Speed of main drive shaft
|
980r/min
|
|
DONGFENG gearbox gear in
|
sixth gear, fifth gear, forth gear, 3rd gear, 2nd gear,1st gear, reverse gear
|
|
Rotated speed
|
132;115;67; 43; 25;14;18(r/min);
|
|
Rotarytable torque
|
7.4----52(kN.m)
|
|
Gear oil
|
CB-HP80/50/32
|
|
Displacement:
|
80ml/r ;50ml/r;32ml/r
|
|
rated working pressure
|
20Mpa
|
|
highest pressure
|
25 MPa
|
|
Hydraulic radiator
|
|
|
Model
|
FLJ-45
|
|
voltage
|
24V
|
|
Hydraulic heater
|
|
|
voltage
|
220V
|
|
power:
|
1.5KW*2
|
|
mud pump
|
|
|
Model: 3NB-130
|
Type: Horizontal three - cylinder single acting piston pump
|
|
input power kW(HP)
|
90(130)
|
|
rated displacement l/min
|
1000
|
|
rated input rotate speed r/min
|
565
|
|
rated pressure MPa
|
5
|
|
Chassis
|
|
|
SINOTRUCK HOWO drive form 8x4 336HP
|
|
|
Dimension:
|
|
|
working size (LxWxH):
|
11122×2490×17463mm
|
|
Transportation size(LxWxH):
|
12500*2500*4200mm
|
Related Products
Company Profile
Glorytek Industry (Beijing) Co., Ltd. is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for more than 20 years. We are supported and assisted by highly experienced R&D team and enginners that enable us to complete all the assigned projects successfully as per clients' requirements.
Our factory covers an area of 250,000 square meters, construction area is about 150,000 square meters, having machining machinery, CNC processing center, friction welding machine, testing equipments etc. over 200 sets and more than 600 employees.
Our products have been exported more than 60 countries, including Australia, Russia, Soutn Africa, Zimbabwe, Malaysia, Indonesia, South Korea, France, Sweden, USA, Canada, Haiti etc.
FAQ
Q: How can we choose a suitable water well drill rig?
A: We normally recommend a suitable model according to drilling depth, drilling hole dia. and layer condition on site.
Q: Are you a factory or a trading company ?
A: We are an integrated corporation specialized in manufacturing and exporting.
){kind=link}