Truck Mounted 600m Deep C600hw Water Well Bore Drill/Drilling Rigs Machine with Mud Pump

• Customization: Available
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Model NO.: C600HW
• Drill Hole Diameter: >300mm
• Drill Hole Depth: >200m
• Bit Type: DTH Bit, Tricone Bit
• Drilling Way: Rotary
• Type: Truck Mounted Type
• Hole Diameter: 120--1500(mm)
• Hole Depth: 600(M)
• Run of Rod: 3--4(M)
• Drill Head Lifting Force(Kn): 130
• Dimensions(L-W-H) Working: 9600*2950*7900(mm)
• Transport Status (L-W-H): 10200*2470*3300(mm)
• Supporting Form: Hydraulic Unit
• Rig Mass: 12500(Kg)
• Usage: Water Well
• Power Type: Diesel
• Transport Package: Sea Worthy Packing.
• Specification: SGS
• Trademark: GLORYTEK
• Origin: Beijing, China
• Production Capacity: 20 Sets/ Month

Product Description

C600HW Truck-mounted water well drilling rig
 

 

Main features:

Main features:
1. C600HW truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotary drilling rig.
2. The truck chassis adopts the special rig chassis of brand SINO-TRUK 8X4 and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, rotary table, drilling tower, feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. This rig has very compact structure, the engine of chassis is adopted SINOTUCK diesel engine 336HP (strong power)/2200rpm
5. The drilling rig has independent diesel engine CUMMINS 6BTA-C180 , 132kw. Not only meet the drilling requirements, but also reduce energy consumption, it is very affordable.
6. We set up a 30kw generator (MF) which is convenient to illuminate or work at night.
7. There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
8. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
9. According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS, Sweden Atlas; can carry out air lifting reverse circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with mud pump; can carry out core-drilling with other special drilling tools.
10. The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad.  

Technical Parameter
   

Open hole diameter	500mm
Drill depth	600m
Kelly:	108×108×7500 ( or 10500)mm
Drill pipe	Φ89×5500(6000or 9000)mm
Mast height	12500mm (or 16232mm)
Mast efficient height	11800 (or 15255mm)
Max-loading of mast	36t
Main hook rated load	32t
Vice hook rated load	25t
Main winch single rope lifting capacity 50kN; rope capacity 120m
Vice winch single rope lifting capacity 50kN;rope capacity 120m
steel wire specification	Φ18NAT6×37+NF1770
Rotarytable inner diameter	500mm;
Diesel engine:	DONGFENG CUMMINS 6BTA5.9-C180-In-line six cylinder water cooled water cooled four stroke turbocharged intercooled diesel engine,Related power 132kW/2200rpm, MAX torque 750N.m/1600rpm;
	When drilling the CUMMINS output rotate speed 1300r/min
Rotarytable speed
Speed of main drive shaft	980r/min
DONGFENG gearbox gear in	sixth gear, fifth gear, forth gear, 3rd gear, 2nd gear,1st gear, reverse gear
Rotated speed	132;115;67; 43; 25;14;18(r/min);
Rotarytable torque	7.4----52(kN.m)
Gear oil	CB-HP80/50/32
Displacement:	80ml/r ;50ml/r;32ml/r
rated working pressure	20Mpa
highest pressure	25 MPa
Hydraulic radiator
Model	FLJ-45
voltage	24V
Hydraulic heater
voltage	220V
power:	1.5KW*2
mud pump
Model: 3NB-130	Type: Horizontal three - cylinder single acting piston pump
input power kW(HP)	90(130)
rated displacement l/min	1000
rated input rotate speed r/min	565
rated pressure MPa	5
Chassis
SINOTRUCK HOWO drive form 8x4 336HP
Dimension:
working size (LxWxH):	11122×2490×17463mm
Transportation size(LxWxH):	12500*2500*4200mm

Related Products




Company Profile



 

Glorytek Industry (Beijing) Co., Ltd. is an integrated corporation specialized in manufacturing and exporting top quality drilling equipment and drilling parts for more than 20 years. We are supported and assisted by highly experienced R&D team and enginners that enable us to complete all the assigned projects successfully as per clients' requirements.

Our factory covers an area of 250,000 square meters, construction area is about 150,000 square meters, having machining machinery, CNC processing center, friction welding machine, testing equipments etc. over 200 sets and more than 600 employees.

Our products have been exported more than 60 countries, including Australia, Russia, Soutn Africa, Zimbabwe, Malaysia, Indonesia, South Korea, France, Sweden, USA, Canada, Haiti etc.





 

FAQ

Q: How can we choose a suitable water well drill rig?
A: We normally recommend a suitable model according to drilling depth, drilling hole dia. and layer condition on site.
 

Q: Are you a factory or a trading company ?
A: We are an integrated corporation specialized in manufacturing and exporting.

Q: What is your payment terms?
A: We can accept T/T,L/C.

Q:.What is your MOQ? How long is the delivery time?
A: Our MOQ is 1 sets. Normally for drill rig, the delivery time is about 25-30 days after receiving payment, the drilling tools would be about 15 days.

Q:. How long is the warranty?
A: The guarantee period for mainframe is one year (excluding the quick wear parts).

Q: Can we print my Logo on the products?
A: Yes, we can. We support OEM .